Anionic wetting and dispersing agent for inorganic pigments. Composition: Aliphatic polyether with acidic groups.
Out of stock
ADD-6230 is a anionic wetting and dispersing agent for inorganic pigments. ADD-6230 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems.
The advantages are:
- Reduced grinding and dispersion time
- Increased pigment loading in the mill-base or pigment concentrate enabling to achieve VOC level below 250 g/l in highly filled solvent-based systems
- Improved gloss, levelling and flow Packaging
Composition: Aliphatic polyether with acidic groups
Active ingredients: 100%
Density at 20 °C: 1.02 – 1.07 g/cm3
Acid value: 95 – 105 mg KOH/g
Appearance: Clear yellowish liquid, turbidity at approximately 18 °C
Should be stored in a cool dry place, preferably at room temperature (20 °C). The haziness and solidification that can take place below 18 °C, does not affect the quality and can be reversed by heating. When kept in an original unopened container, it will keep up to 5 years from the manufacturing date. Should be handled in accordance with good industrial practice. Detailed information can be found in the Safety Data Sheet.
Solvent based applications, Water based applications
Acrylic emulsion, Acrylic hydroxy functional, Acrylic water reducible, Alkyd emulsion, Alkyd medium oil, Alkyd melamine, Alkyd short oil, Alkyd water reducible, Chlorinated rubber, Considered suitable voc free, Epoxy, Epoxy solvent, Epoxy solvent free, Nitro cellulose, Polyester melamine, Polyurethane emulsion, Vinyl copolymers
Colour acceptance, Cost effective, Lower viscosity, Reduces dispersion time, Reduces flooding
Downloads (TDS & SDS)
TECHNICAL DATA SHEET
SAFETY DATA SHEET