ADD-3030 is a silicone-based additive to improve surface properties in all kinds of industrial coatings. It reduces surface tension providing better substrate wetting. ADD-3030 improves levelling and increases scratch and abrasion resistance.

ADD-3031 is a silicone surface additive to provide good substrate wetting of critical substrates and excellent anti-cratering by reduction of surface tension of the coating systems. It also improves surface slip, scratch resistance and anti-blocking properties. ADD-3031 is a heat resistant silicone additive, which shows no thermal decomposition at temperatures between 150°C and 230°C. Due to its low surface tension, it prevents floating of pigments, Bénard cells and pinholing. It is suitable for coatings and printing nks.

ADD-3033 is a cost-effective silicone surface additive to provide good substrate wetting of critical substrates and excellent anti-cratering by reduction of surface tension of the coating systems. It also improves surface slip, scratch resistance and anti-blocking properties. ADD-3033 improves dust and spray dust acceptance and allows higher film thickness on vertical surfaces. It reduces air draft sensitivity particularly in wood coatings. ADD-3033 prevents formation of Bénard cells and improves flatting agent orientation. It is suitable for coatings and printing inks.

ADD-3034 is a silicone surface additive designed for substrate wetting, anti-cratering and levelling of the coatings. Due to the fluorocarbon modification, ADD-3034 has very low surface tension and is extremely compatible with most paint systems, both water- and solvent-based industrial coatings.

ADD-3035 is a silicone surface additive designed especially for unsaturated polyester and epoxy resins. Due to the solvent used (Methoxypropanol), ADD-3035 is particularly suitable for aqueous coatings.

ADD-3230 is a silicone-based surface additive to improve surface properties in all solvent-based, solvent-free and aqueous systems. It is specially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. ADD-3230 can be used in coatings and printing inks.

ADD-3231 is a silicone-based surface additive to improve surface properties in all solvent-based medium- to high-polar systems. It is specially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. ADD-3231 can be used in coatings and printing inks.

ADD-3236 is a silicone surface additive with defoaming properties to improve the surface properties of coatings, with particular emphasis upon leveling, it increases surface slip and thus improves scratch and mar- resistance. ADD-3236 is a heat resistant due to the alkyl-modification, which shows no thermal decomposition at high temperatures in baking systems such as coil coatings (up to 280°C for 15 minutes).

ADD-3239 is a silicone-based levelling additive with defoaming properties. It improves the surface properties of solventbased and solvent-free coatings with particular emphasis upon levelling. With a slight influence on surface tension, ADD-3239 can impart defoaming properties to the system. It is soluble in aliphatic and aromatic hydrocarbons, esters and ketones but insoluble in water. Sometimes it is necessary to dilute this 100% active material with a compatible solvent to improve its compatibility in a particular system. ADD-3239 is suitable for coatings and composite.

ADD-3570 is silicone-free surface control additive for aqueous systems. It gives excellent leveling and anti-cratering properties in most aqueous resin systems.

ADD-3572 is an anionic silicone-free surface control additive for aqueous systems. It gives excellent leveling and anti-cratering properties in most aqueous resin systems

ADD-3580 is surface control additive for aqueous systems. It provides powerful reduction in surface tension, which leads to excellent substrate wetting, levelling and anti-cratering properties. It is suitable for coatings and printing inks.

ADD-3772 is a silicone-free additive suitable for aqueous and non-aqueous systems. It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and leveling; and prevent formation of craters without stabilizing foam. ADD-3772 is suitable for coatings and printing inks.

ADD-3777 is a silicone-free additive having high molecular weight and very broad compatibility. It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and levelling and prevent formation of craters without stabilizing foam. The additive provides “long wave” levelling performance and increases gloss of the coating system and does not cause any inter-coat adhesion problems. It is highly effective in the transportation coatings when combined with the silicone-based additive ADD-3031. ADD-3777 is suitable for coatings and printing inks.

    Information / Sample request

    We thank you for your interest in our products. To be sure that we provide you with the most suitable samples, we kindly ask you to fill out the form below. We shall be contacting you soon.

    ADD-1501ADD-1502ADD-2020ADD-2021ADD-2022ADD-2025ADD-2026ADD-2035ADD-2040ADD-2041ADD-2285ADD-2504ADD-2508ADD-2521ADD-2522ADD-2523ADD-2524ADD-2525ADD-2526ADD-2540ADD-2548ADD-2549ADD-2560ADD-2561ADD-2563ADD-2564ADD-2568ADD-2720ADD-2721ADD-2722ADD-2723ADD-2724ADD-2730ADD-3030ADD-3031ADD-3033ADD-3034ADD-3035ADD-3230ADD-3231ADD-3235ADD-3236ADD-3239ADD-3260ADD-3290ADD-3506ADD-3572ADD-3575ADD-3580ADD-3581ADD-3585ADD-3772ADD-3777ADD-3906ADD-4009ADD-4010ADD-4046ADD-4047ADD-4063ADD-4100ADD-4276ADD-4401ADD-4430ADD-4519ADD-4590ADD-5001ADD-5002ADD-5005ADD-5010ADD-5044ADD-5054ADD-5056ADD-5065ADD-5066ADD-5071ADD-5207ADD-5217ADD-5244ADD-5765ADD-6211ADD-6212ADD-6213ADD-6215ADD-6220ADD-6225ADD-6228ADD-6230ADD-6231ADD-6245ADD-6250ADD-6525ADD-6540ADD-6622ADD-7112ADD-7730ADD-A40ADD-N40ADD-P50ADD-P90